6 Tips for Unclogging a Stubborn Drain


Have you been experiencing clogged drains? Clogged drains can be a major nuisance because of how much they disrupt your day-to-day life. Dealing with a clogged drain can be costly and inconvenient. 

Below, we’ve compiled six essential tips that can help you remove whatever has found its way into the drain line, whether it’s located in your shower, bathroom sink, or outside, on the street.

Keep reading for an entire breakdown of the most effective ways on how to unclog a drain.

1. Use a Plunger to Unclog Your Sink

If you want to unclog drain that is giving you grief, there are a few tips that you can use to try and unclog it. One is to use a plunger. This can be effective if the clog is not too far down the drain.

2. Check Your Garbage Disposal for Any Clogs

One of the most common causes of a clogged drain is a buildup of food scraps in your garbage disposal. To unclog your drain, first check your garbage disposal for any clogs.

If you encounter more serious issues, such as one that requires a slab leak repair, it’s time to call in a professional plumber.

3. Baking Soda and Boiling Water

Baking soda and boiling water is a tried and true method for unclogging even the most stubborn of drains. Simply pour a cup of baking soda down the drain.

Then follow it with a pot of boiling water. Let it sit for a few minutes, then flush with hot water. You should see the clog start to dissolve and clear away.

4. How to Unclog a Drain: Try the Wire Hanger Method

Try the wire hanger method. This method is simple and only requires a few tools that you probably have around your house. First, straighten out a wire hanger. Then, make a small hook at one end of the wire.

Next, insert the hooked end of the wire into the drain and push it through until you feel resistance. Finally, pull the wire out of the drain and, hopefully, the clog will come out with it.

5. Remove Clogs With a Drain Snake 

Drain snakes are long, flexible rods with a spiral of wire at the end. To use one, simply insert the wire into the drain and rotate it in a clockwise direction.

The wire will catch on any obstructions and break them up, allowing the water to flow freely again. You need to be careful not to damage your pipes with the wire, so be sure to insert it slowly and carefully. 

6. Liquid Drain Cleaner

You may need to resort to using a liquid drain cleaner for removing clogs. Be sure to read the instructions on the cleaner carefully before using, as some cleaners are more potent than others and can damage your pipes if used incorrectly.

Pour the cleaner into the drain and let it sit for the amount of time specified on the bottle. Once the time is up, run hot water down the drain to flush out the cleaner and any build-up that has been loosened.

Say Goodbye to Your Unclogged Drain

To sum it up, if you’re dealing with a stubborn drain, your best bet is to start with a plunger. If that doesn’t do the trick, you can move on to using a drain snake or an auger.

Now that you know how to unclog a drain, make sure you check your drains from time to time for possible leaks. 

Did you find this article helpful? If so, then be sure to check out the rest of our blog today.

Like it? Share with your friends!